Undocumented Standalone Tests for the 3100
All commands are entered from the '>>' prompt. Each of the commands below
are prefixed with a 't '. So, to do the system test, the following would
be typed by the user 't a'.
Command Description
------- -----------
a System test
b Display bad memory table (used after m command)
C Color mask test
c Cache test
D DZ test (serial lines)
d Disk RAM test
e Ethernet Standard Address test
F FPU test
f arg Video test. Arg is one of:
b=blue
c=color bars
e=screen filled with E
g=green
r=red
w=white
x=white grid
To get the >> prompt back after this test,
type any character
k Keyboard
L LANCE chip test (ethernet)
l LED test
m Main memory test
n Network RAM test
P Mouse test
p pcc test
R CSR test
r RTC test
s SII test
t TLB test
V VDAC test
v Video RAM test
w write buffer test
There are also some commands which specifically test various SCSI devices.
The command prefix for these is 'scsi '. Prior to issuing any of the
commands for specific defices, the 'scsi pb' command must be issued to
size the bus.
Command Description ------- ----------- pb Size SCSI bus and configure cd arg Canned disk test. DESTROYS ALL DATA. The arg is the SCSI ID ct arg Canned tape test. DESTROYS ALL DATA. The arg is the SCSI ID cr arg Canned CD ROM test. DESTROYS ALL DATA. The arg is the SCSI ID(hey, wait a minute, destroys all data on cdroms? somehow I don't think so ;-)